Intravenous Use of Colloidal Silver

I found my copy of this post from the old forum. It is unique in that it is (as far as I know) one of the first modern descriptions of IV use of CS. In WWI, it was apparently common for CS to be injected for the purpose of attempting to counter Cholera. Very little remains of their knowledge, although I would welcome anyone's input if they find old accounts of the use of CS. This pair of posts were put onto the old site by a wonderful person from Africa in response to a request from participant LordKarma. I have sought his permission to quote this pair of responses, as the information is so unique. The first comment was posted to illustrate Tani's uses of CS. LordKarma then requested that Tani posted his dosages and CS types, which Tani then did.
"My name is Taniform Asongwe, I live in the North Western Region of Cameroon. This region is ravaged by HIV and other diseases.  When I lost my brother in 2009 to HIV I got really annoyed with big Pharma and decided to start investigating the political and economic benefits/motivations of the disease process in general. When I realized how skewed medical curricula became after 1910, the world over, I took the decision to educate myself as much as possible. My conclusion is that a patient cured is a customer lost from the point of view of big Pharma, meanwhile medical research is primarily motivated by large profit margins at a later date, while the FDA is entirely controlled by the pharmaceutical industry for its own interests consequently leading to the ill and suffering to be quietly classified as primary commodities for the biggest market the world has ever endured.
I have had amazing results, my mother has been diabetic for more than 10 years and after prolonged exposure to CS, her sugar levels exceeded 120 only once in the past one year. My aunt was sent home to die with devastating opportunistic infections resulting from HIV. In a few weeks she was leading a normal life to the chagrin and surprise of the MD who sentenced her to death. A kidney infection resulted in my neighbour's 22 year old son falling into a coma for one week. After administering CS to him in the evening about 7 pm he got up by day break and started urinating. Dialysis was suspended 3 days after exposure to CS, one week after that the catheters were removed as (his urea and creatinin levels normalized) it became conclusive they were no longer required. 3 weeks after that he was back in school. And finally another aunt was diagnosed with [a serious illness], using triple distilled water to produce CS, I passed it through a .2 micron syringe filter and gave it to her intravenously and she has had a full recovery although she was also sent home to die as she could not afford the cost of an operation and subsequent [redacted]therapy.
Joining this forum I realized the mistakes I have been making with the production of CS and I am certain correctly produced CS will be of much needed use to my friends and family. I also have a unique opportunity as giving medical advice here is not as regulated as in the western world. Though I have extreme limitations as to the availability of material and equipment like a hotplate/magnetic stirrer, clear corn syrup, cinnamon, 24 to 36 V DC power adapters it is a challenge. Necessity is the mother of creation. I located a small module in my Chinese made DVD player that outputs 30 V. I plugged it out and tapped the power output and have been making CS with it. A few weeks ago I found corn syrup but it contains a caramel colourant. In any case I am reading up on the forum daily and the astounding results are payment enough for me.
Kephra, I thank you so much for dispensing your incredible knowledge regarding CS for free and it is being put to great use to benefit people here. May God bless you and give you the strength to continue giving us this know-how.
Best Regards, Taniform."
This is the second posting, after LordKarma requested the dosages;
"At the beginning I gave her [his diabetic mother] approximately 200 ml morning and evening, that's 400 ml total daily. When she felt better, her eyesight got better and she told me she could see something on a board across the road clearly, her five times peeing in one night was no longer necessary and her energy levels increased and she started tentatively eating some foods she had not been eating. I then reduced it to 2 tablespoons [30 ml] morning and evening for the past eight months now. Though she felt a lot better she at times was not in optimum health, energy levels, skin texture was not so vibrant. I attributed it to her age at 67. However, once I started reducing the ionic/colloidal solution to colloidal as suggested on this forum, she commented about feeling a lot better and started asking for more. I had not informed her I changed the brewing method. Her skin texture is better than it has been in a long time and she does not stop reminding me how much more better she is feeling.
I believe I was producing more colloidal than ionic all along, I simply read up on it,  boiled the water and started the brewing with the water getting cold over time. Now I reduce the gas flame I use and just keep it below boiling point for the ten minutes I need, then reduce with corn syrup. I still cannot determine the exact concentration as I have no TDS meter. I needed to brew for like three hours before getting a slight yellow colour which was my cut off point. Now I brew for 10 minutes after adding a sodium carbonate solution which is quite helpful and I can have more of it.
My abandoned aunt, refused by a medical doctor and referred to go somewhere else with full blown AIDS, she was being carried around and could not eat or talk. I gave her colloidal silver and not ionic as I reduced it with corn syrup and continued boiling until I noticed no more colour change. I started her with 100 ml twice a day because I was worried about a Herxheimer reaction. After a few days when I noticed she was feeling better I increased it to half a litre taken three times daily. Once she started walking and eating without assistance I reduced the dosage again to four tablespoons [60 ml] three times daily. She is no longer plagued by the opportunistic infections, though the HIV is still there.
The grand aunt with [the serious illness], I started her off with two tablespoons three times daily for five days, then I proceeded 5 ml IV once daily for another three days before moving up to 10 ml for 20 days. She had previously been lying down for four months. Now she is back in the market where she sells foodstuff. It was so bad that there was this foul smelling whitish liquid mixed with blood at times dripping down.
The young man whose kidney failed was started at 5 ml IV for three days, then to 10 ml for another seven days then to two tablespoons [30 ml] twice daily for one month. All of this I had to make hard choices because I was being faced with life threatening conditions and had to decide the better yet unknown steps to take.
I hope that I can ask a lot of questions on this forum as I am thinking of using the CS even more courageously particularly regarding HIV. Are there any limitations as to the kind of questions I can ask? I am aware no medical advice is being dispensed on this forum of course.
Currently I have a [seriously-ill] patient who was told she would not be alive by this December. [The illness] had spread right down to her right ribs, of course only visual observation. Since I joined this forum I realized that in the colloidal form I could give her large quantities. She is taking 500 ml daily.  The [illness] has reduced to the [original site] alone where it started but is not getting any better. I am thinking of mixing the CS with DMSO, hoping that it might carry the CS to the growth. I would very much appreciate some input on this. So as of now I am using only colloidal silver.  Sorry for the very long post lordkarma, however I hope to have been explicit enough. Regards Tani."

----------------------------

I must, regrettably, pass a comment that I hope readers will understand; that Big Pharma and their bought-and-paid-for civil servants do not permit a person to claim that they have a cure for certain serious illnesses, and I therefore categorically assert that Tani's comments do not constitute any form of claim for a cure. No proof of diagnosis was furnished in the posts.
In addition, I categorically repeat that NONE of the posts or comments on this website purport to be a cure for any form of cancer, and the owners, administrators and users, commentators and participants DO NOT offer to treat any person for cancer, DO NOT prescribe any remedy or remedies for the treatment of cancer, NOR do any of us give, or purport to give or imply, any advice in connection with the treatment thereof. Any posts claiming this or giving anything resembling such will be deleted.

Making Heat-reduced and Sugar-reduced CS

The first improvement over IS was Heat-reduced CS. This makes use of the fact that Silver Oxide will reduce to metallic Silver nanoparticles in the presence of heat and the absence of oxygen. It can be prepared during the actual production run, or post-production by heating the IS until all or most of the IS turns to CS. It is easy to see the process, because the IS turns a golden-yellow when the ions are reduced to AgNP (Silver nanoparticles).
It was then found that monosaccharide sugars – glucose or fructose – in an alkaline solution (higher than pH 7), would achieve the same result using less energy, thus making a cheaper product. Also, sugar ensures that the reduction process is complete and stays complete. The sugars we use are either a solution of glucose or fructose dissolved in distilled water; or alternatively, one drop of inverted sugar syrup (“Golden Syrup” in the UK, “Karo” in the USA) will do the same thing and is easily purchased from a supermarket.
Heat-reduced CS almost always has a slightly metallic taste, indicating that there is some IS left unreduced. Under some conditions, CS-H can oxidise back to a much paler solution, indicating that the CS-H has returned partially to IS. This can be avoided in almost all cases by heating until no further colour change is seen.
Production of Heat or Sugar-reduced Colloidal Silver (CS-H or CS-S)
The basis of production of true CS (AgNP) is the same as production of IS, but one then reduces the ionic content to AgNP with heat or sugar, either during the production run or post-production in a microwave. (I prefer to heat the DW during the run, but either method works). I have copied-and-pasted some of the paragraphs from the previous post, in case some people wish to print out the “recipe” and have it beside them when making the CS.
If this is your first attempt, use a small quantity of DW the first time (say 250 mls), in order to avoid wastage of DW. If you have a laboratory heating plate with magnetic stirrer, this is ideal. However, these stirrers are astoundingly expensive and I have found a single-ring hotplate is quicker to heat the water and can be bought off eBay quite cheaply.
In the absence of a magnetic stirrer, you can stir the water perfectly adequately using the convection currents in the hot DW. Some people use an air-bubbler to stir the water, but I feel this introduces too much oxygen and atmospheric contaminants and evaporates too much DW. I do not use an air-bubbler for any purpose connected with CS production.
Assemble the electrodes in the usual way, over the chosen reaction vessel. Allow time for the hotplate to get up to temperature. You can shorten the time and energy required by pre-heating the DW in a microwave, if the beaker will fit. The temperature at which I run my production is about 80 – 90 degrees C. You do not need a thermometer; the right temperature for hot-water production is when bubbles form at the bottom of the beaker but do not manage to break the upper surface of the water. You may need to top up the DW during a long production run. Tall, relatively narrow cylinders or cafetieres are much more thermally-efficient than a shallow container.
Once the DW is up to temperature, connect the PSU and ensure that the positive lead is connected to the Silver anode. With the voltmeter and ammeter on-line, start the current. We will use the same electrolyte as before, in order to speed up the process and allow us to calculate the ppm of the final product with much greater accuracy. Add Sodium Carbonate drop-by-drop, allowing time for the convection currents to stir the DW and thoroughly mix the electrolyte, until the voltage reduces to about 90 per cent of the initial value. This indicates that your current has come within the control range of the constant-current circuitry of the PSU.
In most cases, if the anode is a silver wire or narrow strip, the current should be around 2-5 mA. 1 toz Silver bullion bars can run at 15 mA. Large Silver anode plates (say, 150 mm long by 30 mm wide) can easily be pushed to 15 mA and I run my very largest anodes at 40 mA. At this time, note the current (mA) and start your timer.
Using the calculations in the previous post, estimate the time required to produce 20 ppm CS. There is no point in attempting to produce uncapped CS at a higher concentration than 20 ppm. Anything over 10 ppm will work effectively, but a final strength between 15 – 20 ppm is desirable. If you wish to make concentrations higher than 20 ppm for ease of storage or transport, then make capped CS. Run the process until the required ppm is made.
You will be able to watch the DW slowly turn yellow as the Silver is reduced to metallic CS AgNP. The process is complete when the run-time indicates that you have made the required ppm of AgNP. At this stage, the heat in the DW will have reduced the majority of IS to AgNP and produced true CS.
To finish making Heat-reduced CS, stop the current and continue to heat the CS-H until no more colour change takes place. You can do this on the hot-plate or if the beaker is small, transfer it to a microwave.
To make sugar-reduced CS, add a drop of “Karo” or “Golden Syrup”. You can make 1 M glucose or fructose and add a few drops, but “Karo” or other inverted-sugar syrups work well. You can add the sugar syrup at the beginning, after the water is heated, and just before you start the current; alternatively, you can add it at the end, while the CS is cooling. Post-production reduction is considered slightly better, as one is not then electrolysing the sugar, but I have found both techniques work very well.
There is one final alternative, which is very energy-efficient, and that is to make IS cold, then boil in a microwave for CS-H, or add a drop of syrup and boil for CS-S. This works, but heating the product during the production run makes for better stirring and the process runs cleaner.
The result should be totally clear, yellow CS containing no visible particles, and the end-product should look like the finest single-malt Scotch whisky (finest Tennessee sippin' whisky if you're in the USA). The final colour has also been likened to Johnson's baby shampoo, (and like the shampoo, CS does not sting even in the eyes). Tasting the product should give no metallic taste, in fact, it should not really taste of anything.
Any large particles of Oxide floating in the water or left at the bottom of the reaction vessel (it looks like black or grey dust) can be removed by filtering through an aquarium air-stone or the CS can be decanted off. If you filter the product, do not use the same tubing and air-stone for filtering IS, or the IS will immediately be reduced to CS.
Other Notes Concerning Colloidal Silver (AgNP).
Sugar-reduced CS is the universal product. It can be used for any purpose for which CS is applicable. The sugar molecules are small enough that they do not “cap” the AgNP in the same way that cinnamon-reduction provides, so CS-H or CS-S may be more suitable for treating wounds or external abrasions. The use of cinnamon-reduced CS for external use is still the subject of research.
Heat-reduced CS (CS-H) is the only version that I would consider for using upon myself intravenously, until more evidence is available. However, we have had a unique and valuable contribution from a forum member which will be the subject of a later post on this aspect of using CS. The possibility of quickly and effectively curing bacterial meningitis (a fast-acting and lethal bacterium) with an IV drip of CS-H is tantalising and theoretically simple.
Until we have more data from up-to-date research, I cannot recommend the use of any CS product for medical use. I am a biologist and chemist but have no medical qualifications. In these pages, I am giving notes as to what I have done and how I have experimented upon myself and other volunteers, in the hope that others may benefit. Anyone who follows these notes should be aware that they are fellow-researchers into one of the most valuable fields of health research in the post-antibiotic era. The use of AgNP for healing has been known (with much more primitive production methods) since the late nineteenth century. These notes are given for research and information purposes only. You should always consult a qualified medical practitioner if you are unwell.

Equip Your Own CS Laboratory

Equip Your Own CS Laboratory

Now, having dealt with some necessary basics, and given some idea of what versions of CS are to be made, we come to the mechanics of manufacturing CS.
All forms of CS, Ionic (IS), heat-reduced, sugar-reduced, and stabilised (capped), can be made using the same set-up. It is possible to make CS using very little equipment, and I will put notes at the end of another article for the extreme low-cost “prepper” version, but the novice will find it easier to make good CS if they invest in an amount of equipment and chemicals.
Just as a master fisherman can go out with a line, hook and knife and make a fishing rod from a stick, CS can be made with very little, but the average user will find everything much more repeatable if they invest in the basics. When you have made several batches, then there are other improvements you may wish to buy, but we’ll start simply. Readers who have made CS are welcome to comment on my set-up and add suggestions of their own: -
A Fine (Pure) Silver Anode. The most important item, obviously. This must be .999 (999/1000) pure Silver. Normally advertised on websites as “Fine Silver” it is available from bullion dealers, jewellery suppliers, or coin dealers. You will see many members of the old forum who use a 1 toz Silver bullion bar or a .999 Fine Silver coin. These work very well; my only suggestion would be to take it to a jeweller or engineering workshop and have the coin or bar milled out flatter, in order to increase the surface area. However, Kephra made gallons of CS over the course of some years, using a 1 toz Bullion bar as supplied. Despite comments on some websites, .9999 Fine Silver is not necessary, the improvement is minuscule, and much more expensive.
I use Fine Silver sheet or strip; others use Silver rods or wire. The larger the sheet, the higher the amperage you can use. I would start with a strip four inches (100 mm) by a quarter-inch (6 mm) wide and about 15 thou inches thick (0.40 mm), or use a 1 toz bullion bar. DO NOT USE .925 Sterling Silver; this is 7.5% copper, and is not suitable for making CS. You do not need to use two Silver electrodes unless the power supply gives auto-alternating current, but you may do so if you wish. Most commercial generators suggest the use of two Silver electrodes, but this is probably to avoid a novice connecting them the wrong way round. My largest electrodes are twelve inches by one inch; the biggest I have ever seen was three inches wide by a yard long!
A Constant-Current Bench Power Supply. You can use small and cheap units; one of the users simply took a PSU from a computer printer, and I'm sure that would be adequate. I would suggest, however, that you buy the right thing first time. The “right thing” is a bench PSU with constant-current facility 0-2 Amps, 30 – 50 Volts. Radio Shack (in the USA) and Maplin Electronics (in the UK) produce ideal units, and I'm sure eBay can be relied on, as well. The constant-current facility is critical for making CS, as if the current runs away, then (a) it is very difficult to calculate the resulting ppm, and (b) the particles can become far too large.
Ammeter: The meters in the average PSU are far too coarse to give correct amperage readings. The voltage meter built into the PSU is adequate, as only an approximate reading is necessary, but you will need an ammeter capable of measuring 0 – 20 milliamps, or 0 – 50 milliamps if you are making high-volume batches.
TDS (Total Dissolved Solids) Meter: This is NOT necessary. It cannot measure the amount of Silver in the water accurately, despite what you see on other websites. It has only one use, to test the distilled water for quality. I have one for this purpose, but if you purchase your DW from any reputable distilled water supplier, it is unnecessary.
Other items:
Electric hot-plate.
Heat-resistant glass jar (I buy various sizes of cafetiere from a supermarket and discard the plastic handles).
Stirrer pump (I use a miniature water-pump from a decorative water-fountain). This is only for manufacturing IS in bulk, to stir the cold water. For hot-water production of CS, I find that the convection currents in the jar are quite adequate to stir the distilled water.
Measuring jug (you will need to know the volume of DW).
Small hobbyist blow-torch (for cleaning the Silver electrode).
Any method of holding the electrodes in the water; I use a plastic grid with crocodile clips to hold the electrodes.
Aquarium air tubing and air-stone (for filtering).
A thermometer may be useful, but is not essential.
Chemicals:
Distilled Water (DW) High-quality de-ionised water will do.
Karo high-fructose syrup (USA) or Golden Syrup (UK).
Sodium Carbonate (Washing Soda) or Sodium Hydroxide.
Vodka (cheapest will do, it’s not for drinking).
Cinnamon (powdered version).
 
Sources:
Silver anodes:
http://argex.co.uk/productlists.php?cat=30 (Argex – UK)
http://www.cooksongold.com/Sheet/Fine-Silver-Sheet-0.40mm-Half-Hard-Max.-500mm-X-500mm-prcode-CSF-040 (Cookson - UK)
In the USA, just call in to any bullion coin dealer.
PSU:
http://www.maplin.co.uk/productsearch?criteria=Bench%20Power%20Supplies (Maplin – UK – Codes N27GG, N93CX, GW02C)
http://www.ebay.com/itm/Extech-382260-80W-Switching-Power-Supply-/190847904340?pt=LH_DefaultDomain_0&hash=item2c6f6bea54 (or similar, eBay, USA)
Or if you want an easy life with the best generator I know of, then buy a SilverTron:
http://cart.silver-tron.com/
Chemicals:
Druera Cinnamon, the best in the world;
http://druera.com/shopping/ceylon-cinnamon-ceylon-cinnamon-powder-c-62_73.html but I suppose any will do.
Distilled Water;
http://www.reagent.co.uk/distilled-water (UK)
In the USA, any large supermarket.
 
Coming next: assembly of the equipment.